Laminate slitters
3 products. Displaying 1 to 3.
Mar Bel Model No.: LS-7 / LS-12
7" and 12" throat single laminate slitter
The MAR-BEL slitter is, in all practicality, a die which punches out a 1/16'' kerf. The single slitting models are designed to provide their owner with maximum throughput of accurate, smooth-edged laminate product over the range of cutting widths allowed by the throat model selected. The machine will slit over a variety of thicknesses, easily slitting vertical or countertop grades without adjustment for the variation in material thickness.
Call (801)498-7891
Details: Fence - Sturdy double slide-dual lockdown mechanism assures durable, accurate cuts ***
Dust Free - 1/16'' Kerf is disposed of through the chute utilizing a free floating extractor blade. This is a non wear part that prevents the blade set from being "sprung" by kerf collection. ***
Efficient - After the operator has properly aligned the fence, the machine will slit your material to size, only requiring the operator to hold the material against the fence as the blades self feed the material once it is engaged. ***
Cost Effective - Once "snapped in" on the machines operation, relatively unskilled labor can operate the slitter and free up saws for tasks they are better designed for. The MAR-BEL slitter owner will also experience noticeable savings in sharpening costs: due to the unique cutting technique of the die used to slit the laminate, blade wear is minimal ... The quality of the cut will not gradually deteriorate as you can expect from the common aluminum shear device. In addition, the three bladed die won't give you a beveled edge as shears do as they dull. Expect fewer linear feet when cutting metallic laminates. The blades can normally be sharpened 4-7 times when serviced properly. Their renowned factory sharpening staff ensures that the blades are chacked for sufficient OD and that in-house turnaround doesn't exceed two days maximum. All of the above spell substantial savings in terms of sharpening costs and unneeded circular saw blades. ***
Tolerance - cut edges are specified to within 1/32'' or better of a straight edge if the operator properly holds the material to the fence. Different widths are slit with quick fence adjustments. ***
Additional Technical Data - 1/3 HP totally enclosed fan cooled gearmotor with in-line reducer, 110V, 60Hz split phase motor, feed speed approximately 40 FPM, self feeding, 1/2'' minimum cut, 7" maximum cut.
Weight - 7" model 375 lbs - 12" model 450 Lbs
Mar Bel Model No.: DLS-26 / DLS-36
26" and 36" throat laminate slitter
The MAR-BEL slitter is, in all practicality, a die which punches out a 1/16'' kerf. The single slitting models are designed to provide their owner with maximum throughput of accurate, smooth-edged laminate product over the range of cutting widths allowed by the throat model selected. The machine will slit over a variety of thicknesses, easily slitting vertical or countertop grades without adjustment for the variation in material thickness.
Call (801)498-7891
Details: Fence - Sturdy double slide-dual lockdown mechanism assures durable, accurate cuts ***
Dust Free - 1/16'' Kerf is disposed of through the chute utilizing a free floating extractor blade. This is a non wear part that prevents the blade set from being "sprung" by kerf collection. ***
Efficient - After the operator has properly aligned the fence, the machine will slit your material to size, only requiring the operator to hold the material against the fence as the blades self feed the material once it is engaged. ***
Cost Effective - Once "snapped in" on the machines operation, relatively unskilled labor can operate the slitter and free up saws for tasks they are better designed for. The MAR-BEL slitter owner will also experience noticeable savings in sharpening costs: due to the unique cutting technique of the die used to slit the laminate, blade wear is minimal ... The quality of the cut will not gradually deteriorate as you can expect from the common aluminum shear device. In addition, the three bladed die won't give you a beveled edge as shears do as they dull. Expect fewer linear feet when cutting metallic laminates. The blades can normally be sharpened 4-7 times when serviced properly. Their renowned factory sharpening staff ensures that the blades are chacked for sufficient OD and that in-house turnaround doesn't exceed two days maximum. All of the above spell substantial savings in terms of sharpening costs and unneeded circular saw blades. ***
Tolerance - cut edges are specified to within 1/32'' or better of a straight edge if the operator properly holds the material to the fence. Different widths are slit with quick fence adjustments. ***
Additional Technical Data - 1/3 HP totally enclosed fan cooled gearmotor with in-line reducer, 110V, 60Hz split phase motor, feed speed approximately 40 FPM, self feeding, 1/2'' minimum cut, 26" maximum cut.
Mar Bel Model No.: MLS-12
12" throat gang slitter
The MAR-BEL slitter is, in all practicality,a die which punches out a 1/16'' wide kerf. The single slitting models are designed to provide their owner with maximum throughput of accurate, smooth-edged laminate product over the range of cutting widths allowed by the throat model selected. The machine will slit over a variety of thicknesses, easily slitting vertical or countertop grades without adjustment for the variation in material thickness.
Call (801)498-7891
Details: Features:
Flexible - Different size spacer configurations allow the custom width slitting over the 12'' throat - up to a maximum of 10 cuts. Additional spacers and cutting heads may be added later up to the maximum. The throat is open ended, allowing you to cut from a larger sheet. Some customers choose to order additional setups on other sets of shafts. Cutting widths are changed by removing the shaft and resetting spacers on the top and bottom shafts. Some setups will require additional spacers. ***
Dust Free - No dust collection is required. 1/16'' kerf is desposed of via the free floating extractor blades ***
Efficient - The gang throat can be utilized to rapidly produce straight banding. The machine will tirelessly slit your material to size, only requiring the operator to initially align the stock against the fence as the blades will self feed the material once it is engaged. ***
Cost Effective - Once "snapped in" on the machines operation, relatively unskilled labor can operate the slitter and free up saws for tasks they are better designed for. The MAR-BEL slitter owner will also experience noticeable economies in sharpening costs: due to the unique cutting technique of the die used to slit the laminate, blade wear is minimal ... The quality of the cut will not gradually deteriorate as you can expect from the common aluminum shear devise. In addition, the three bladed die won't give you a beveled edge as shears tend to do as they dull. Expect fewer linear feet when cutting metallics. The blades can normally be sharpened 4-7 times when serviced properly. Our renowned factory sharpening staff ensures that the blades are chacked for sufficient OD and that in-house turnaround doesn't exceed two days maximum. All of the above spell substantial savings in terms of sharpening costs and unneeded circular saw blades. ***
Tolerances - cut edges are specified to within 1/32'' or better of a straight edge if the operator properly holds the material to the fence. ***
Additional Technical Data - 1/3 HP totally enclosed fan cooled gearmotor with in-line reducer, 220V, 60Hz single phase motor, feed speed approximately 40 FPM, self feeding, 1/2'' minimum cut. ***
Weight - 1300 lbs.
3 products. Displaying 1 to 3.