Lathes
5 products. Displaying 1 to 5.
Shop Fox Model No.: M1016
10" X 20" Bench Lathe
An excellent small-sized lathe with a 9-3/4" swing and 21" distance between centers, the Model M1016 comes with handy accessories like a 5" 3-jaw chuck, eye shield, 4-way turret tool post, Cross slide table,
eleven (11) change gears,
two (2) dead centers,
forward / reverse switch with emergency stop, and
3/4 HP, 110V, single-phase, 1725 rpm motor.
Call (801)498-7891
Details: Swing = 9-3/4" ***
Swing over cross slide - 6" ***
Distance between centers - 21" ***
Spindle bore - 3/4" ***
Spindle taper - #3 MT ***
Tailstock taper - #2 MT ***
Tailstock barrel travel - 1/2" ***
Cross slide travel = 4-1/4" ***
Compound travel = 2-1/4" ***
Number of speeds - Six (6) -
150, 240, 490, 750, 1200, 2400 RPM ***
Range of threads (inches) = 8 TPI - 40 TPI in 12 steps (Gear changes required) ***
Range of threads (metric) = 12 @ 0.4 - 3.0mm ***
Approximate shipping weight: 353 lbs.
Shop Fox Model No.: M1099
10" X 26" Bench Lathe with Quick Change gear box
Just like larger lathes, changing the thread selections is quick and easy on the M1099 10" x 26" Bench Lathe. Instead of swapping change gears for each thread selection, merely refer to the thread chart and rotate the alpha and numeric dials on the quick change gearbox to make the thread change. This six speed lathe also has extended length hardened and ground precision bedways,and a 1" spindle bore. The machine comes standard equipped with a 1 HP, 110V, single-phase motor; 5" 3-jaw chuck with two sets of jaws;
6-1/2" 4-jaw chuck with reversible jaws;
steady rest;
follower rest;
thread chasing dial;
#3 MT dead center;
4-way tool post;
face plate;
tool box & tool kit.
Call (801)498-7891
Details: Swing over bed = 9-5/8" ***
Swing over cross slide = 6-1/8" ***
Distance between centers - 26" ***
Spindle bore - 1" ***
Spindle thread = 1-3/4" x 8 TPI ***
Spindle nose taper - #4 MT ***
Number of speeds - Six (6) -
150, 300, 560, 720, 1200, 2400 RPM ***
Lead screw = 3/4" - 12 TPI ***
Compound travel = 3-1/2" ***
Cross slide travel = 6-1/2" ***
Carriage travel = 22-1/2" ***
Maximum tool size - 3/8" x 3/8" ***
Tailstock barrel travel = 2-1/2" ***
Tailstock barrel taper - #3 MT ***
Number of longitudinal feeds = Nine (9) ***
Range of longitudinal feeds = 0.0023 - 0.013 ***
Number of inch threads - 33 ***
Range of inch threads = 8 - 72 TPI ***
Number of metric threads - 26 ***
Range of metric threads = 0.25 - 3.5mm ***
Overall dimensions - 32"W x 50"L x 16-5/8"H ***
Approximate shipping weight - 440 lbs.
Shop Fox Model No.: M1098
13" X 40" Geared Head Engine Lathe
This Geared Head Lathe has all the features, capacity and accuracy for turning high precision projects. The precision-ground induction-hardened ways, oil-bath headstock, cast iron construction, HD quick change gearbox and flame-hardened headstock gears ensure a dependable, accurate machine ideal for any maintenance or job shop. Standard equipment includes 2 HP, 6.5A, 220V, 3-phase, 1720 RPM spindle drive motor; steady rest / follower rest;
chip pan;
splash guard;
base stand;
4-Way turret tool post;
halogen work light;
chuck tools;
oiler;
4-Jaw chuck w/ 2 sets of jaws;
10" faceplate;
spindle taper sleeve 5 MT - 3 MT;
dead centers - 3 MT;
thread chasing dial;
40-tooth change gear.
Call (801)498-7891
Details: Bed width - 7.3" ***
Swing over bed - 13" ***
Swing over gap - 18.3" ***
Swing over saddle - 7.8" ***
Distance between centers - 40" ***
Height of center line - 6.5" ***
Compound slide travel - 3.2" ***
Cross slide travel - 6.3" ***
Tailstock barrel travel - 3" ***
Leadscrew diameter - 22 mm ***
Feed rod diameter -19 mm ***
Cutting tool maximum size - 5/8" x 5/8" ***
Spindle nose - D1-4 camlock ***
Spindle bore - 1.5" ***
Spindle taper - # 5 MT ***
Tailstock diameter - 32 mm ***
Tailstock taper - # 3 MT ***
Spindle speeds - 70 to 2,000 RPM ***
Feed rate range: 0.14 to 0.376 mm / rev ***
Thread range (inch): 4 to 56 tpi ***
Thread range (metric): 0.4 to 7 mm ***
Longitudinal feed: 0.052 to 1.392 mm / rev ***
Cross feed: 0.014 to 0.376 mm / rev ***
Overall length - 74" ***
Overall depth - 28.5" ***
Height - 52.5" ***
Footprint - 70.5" x 15.5" ***
Approx. shipping weight: 1,433 lbs.
Shop Fox Model No.: M1020
14" X 40" Gap Bed Engine Lathe
If your job shop or maintenance shop is in need of a lathe, then the Model M1020 is your answer. Powered by a 3HP motor, this lathe features 12-speeds, a generous 14" swing, 40" distance between centers and 62 different standard and metric threading options. Remove the gap and give yourself an extra 6" in diameter. Standard equipment includes: halogen lamp, foot brake,
hardened and ground gears in headstock,
induction hardened bedways,
jog button and emergency stop,
micrometer carriage stop,
inch/metric dials
6" 3-jaw chuck with top jaws,
8" 4-jaw chuck with reversible jaws,
12" faceplate,
steady rest / follower rest,
4-way turret tool post,
#3 MT dead center,
coolant system with back splash,
thread chasing dial,
one piece cast iron stand,
3 HP, 220V, single-phase, 60 Hz, 1725 RPM spindle drive motor
Call (801)498-7891
Details: Swing over bed - 14" ***
swing over gap - 20" ***
swing over saddle - 8.5" ***
distance between centers - 40" ***
bed width - 10.25" ***
spindle bore - 1-1/2" ***
Cam-lock Spindle nose - D1-4 ***
spindle nose taper- #5 MT ***
cross slide travel - 7" ***
compound travel - 3.5" ***
tailstock barrel taper - MT #3 ***
tailstock barrel travel - 4.625" ***
range of speeds: (12 speeds) 40-1800 RPM ***
number of longitudinal and cross feeds - 40 ***
range of longitudinal feeds (in./rev.) - 0.0012" to 0.0294" ***
range of cross feeds (in./rev.) - 0.0006" to 0.0147" ***
number of inch threads - 40 ***
range of inch threads - 4 to 112 TPI ***
number of metric threads - 22 ***
range of metric threads - 0.45 to 7.5mm ***
leadscrew - 8 TPI ***
feed rod diameter - 3/4" *** height - 45" ***
length - 80" ***
width - 29.5" ***
approximate shipping weight - 2738 lbs.
Shop Fox Model No.: M1100
16" X 40" Hollow Spindle Engine Lathe
An excellent maintenance shop machine. With massive construction and big capacities joined together in this hollow spindle lathe it offers nearly unlimited metal turning capabilities. Features include a 3-1/8" spindle bore, precision spindle bearings, and hefty carriage and bedways. Heavy cast iron construction throughout offers rigidity and precision for every set-up from start to finish. Standard features and equipment include: 10 HP, 220V, 3-phase spindle drive motor, enclosed pump & resevoir system, adjustable feed clutch, five (5) adjustable apron stops, micrometer carriage stop,
no change gears required,
oil-bath gearboxes & apron,
halogen work lamp,
induction-hardened bedways,
inch & metric threading capabilities,
oversized sump/chip tray,
control-panel operated coolant system,
chromed controls & levers,
rear-mounted power supply switch,
10" 3-jaw chuck,
10" 4-jaw chuck,
steady rest / follower rest,
4-way turret tool post,
16" faceplate,
one (1) each live & dead centers,
chuck tools,
oiler,
six (6) adjustable leveling pads.
Call (801)498-7891
Details: Swing over bed - 16" ***
swing over gap - 26" ***
distance between centers - 40" ***
spindle bore - 3.125"
spindle nose - D1-8 camlock
spindle taper- #7 MT ***
tailstock taper - #4 MT ***
cross slide travel - 9" ***
number of spindle speeds -12 ***
range of speeds - 42, 73, 150, 230, 270, 300, 430, 560, 820, 1400, 1060, & 1800 RPM ***
Approx. shipping weight: 5,500 lbs.
5 products. Displaying 1 to 5.