Construction Boring Machines
5 products. Displaying 1 to 5.
Conquest Model No.: 23-HCD
Construction Boring Machine
The Conquest 23-HCD is a dedicated horizontal construction drill that includes features such as STEEL hardened and ground gears and Baldor TEFC motor, that are not found on competitive machines costing much more. Machine has a pnuematic head feed with pnuematic foot control that turns the motor off when released. Independent head alignment with digital positioning. Gage bar with two (2) flip stops. This machine would make an IDEAL auxiliary boring machine for a NESTING OPERATION. MADE IN AMERICA. *** CALL FOR A COMPETITIVE PRICE QUOTE
Price: $6,960.00
Details: Standard featues and specifications: Machine is equipped with: Two (2) pnuematic hold downs; 23 spindle (12R & 11L) boring head with STEEL hardened & ground helical gears; 2 HP Baldor TEFC motor wired for 230/3/60. Crated weight is 1075 Lbs.
Additional Info: OPTIONS:Vertical drilling head on independent axis with a maximum positioning distance of 3.5"from panel edge; 440/3/60 operation
MAGGI Model No.: 2332
23 Spindle Construction Boring Machine
Head Unit with 23 spindles, 32 mm system with quick change chucks. Useful space between the head and working table allow easy access of the operator for tool change. (Drills and/or mills up to 40 mm diameter max.).Pneumatic head tilting
provides a reliable system of head rotation from 0 degrees to 90 degrees with lock and stop reference in any intermediate position.New adjustable fences guarantee precision dowel boring even out of square cut panels. This feature is essential in order to get precise work.
New digital counter for decimal adjustment of fence shifting on the table (excursion 34 mm). This system, quick and exact, allows the adjustment of any drilling distance and the symmetric positioning between 2 fences.<
Call (801)498-7891
Details: Standard Machine
Equipped With:
Quick change chucks ***
10' Long fence for line boring with 4 stops ***
Mitre fence ***
Central fence ***
Reference pin
Ironwood Model No.: BR 23
23 Spindle Construction Boring machine
The Ironwood BR23 Construction Boring machine provides a 23 spindle universal drilling solution, with horizontal and vertical boring capabilities and a fully automated pneumatic tilting of the boring unit from 0 to 90 degrees.
BR 23 Features:
23-spindle single-head boring head, with spindle spacing at a pitch of 32mm, for horizontal and vertical drilling
Pneumatic head rotation from 0°to 90° with locking points for quick set-up at 0°, 45°, and 90°
Accurate positioning of boring unit is easily obtained by the use of digital readouts
(3) Quick-Release pneumatic clamps to ensure work pieces are secured firmly to the table
Heavy duty design of the 3000 mm extension fence and flip stops for improved accuracy and stability
Conveniently located machine controls for user-friendly operations
Pneumatic tilting controls, in conjunction with the tilt-lock, for quick and accurate setting of the boring head
Analog scales set at an angle for easy viewing with both metric and English measurements; adjustable for quick and easy calibration
Ergonomically developed with a heavy duty, rock-solid cast iron table and newly designed, rugged side-profile fences ito improve dependability
Easily removable side-profile fences for quick change over from doweling for case goods to System 32 line drilling
45° miter fence included to improve versatility and custom drilling applications
Drill feed speed adjustment for clean thru panel drilling operations and to improve drilling quality
Quick-Release pneumatic clamps feature pressure releasing technology to prevent operator injury; clamping pressure is discharged when engaged on a non-flat surface
One year warranty *** CALL FOR A COMPETITIVE PRICE QUOTE
Call (801)498-7891
Details: Technical Specifications:
Spindles in boring head - 23 ***
Center distance between spindles - 32 mm ***
Number of pneumatic clamps - 3 ***
Working width - 704mm (27-3/4") ***
Motor power - 3 HP ***
Dimension of working table - 550mm x 950mm ***
Max boring depth - 100 mm ***
Adjustable boring stroke - 50mm to 100mm ***
Position adjustment of boring unit - 0 to 60mm
Spindle speed - 3450 RPM (60Hz) ***
Quick change chucks - 23 pcs ***
Working space requirement (without extension fence) - 41” x 59 ½” x 53” ***
Gross weight - 836 lbs ***
Electrical connection: 230 volt, single-phase, 60 Hz.
Additional Info: Advantage of drilling from below
(1) Safer because the drill bits are covered by the work piece, (2) Constant boring depth, (3) Chips automatically fall out of the holes resulting in: (a) clean holes for inserting dowels or pins, (b) cleaner work table, (c) Immediate stackable panels, (d) faster drilling cycle, (e) longer tool life, (f) easy thru drilling with the use of the hydraulic oil brake cylinder and V-pointed bits - NO accidental drilling into the table surface.
Gannomat Model No.: Optima 25
Construction Boring machine
The Optima 25 is an entry level construction boring machine with "BIG" machine features. The machine includes pnuematic lift for the drill head. All Adjustments for the side fences, drill line stop, and drill head position are made with mechanical digital readouts accurate to 0.1mm. Drills from below with all the well known advantages. A line boring kit is available to make this a complete boring package. CALL FOR A COMPETITIVE PRICE QUOTE
Call (801)498-7891
Details: 25 spindle drill head. Working width of 768mm. Thru feed width of 900mm. 3 HP motor -220/3/60. Air rquirements-85 PSI. Weight 990 Lbs.
Additional Info: Advantage of drilling from below
(1) Safer because the drill bits are covered by the work piece, (2) Constant boring depth, (3) Chips automatically fall out of the holes resulting in: (a) clean holes for inserting dowels or pins, (b) cleaner work table, (c) Immediate stackable panels, (d) faster drilling cycle, (e) longer tool life, (feasy thru drilling with the use of the hydraulic oil brake cylinder and V-pointed bits - NO accidental drilling into the table surface.
Gannomat Model No.: Mentor 25
Construction Boring machine
The Mentor 25 is the ultimate dedicated construction boring machine. With pnuematic lift for the drill head and a pnuematic comb and angle correction, the Mentor can produce consistent results.
All repeating functions are controlled at the free standing pedestal. These include machine start, and comb and rear angle correction control.
Drills from below with all the known advantages.
A line boring kit is available at a later date. Making the Mentor a complete production boring package. CALL FOR A COMPETITIVE PRICE QUOTE
Call (801)498-7891
Details: 25 spindle drill head.
Working width 768mm.
Thru feed width of 900mm.
Drill Head stroke of 100mm.
Max. workpiece thickness of 100mm.
Motor is 2 HP 220/3/60.
Air pressure required - 85 PSI.
Weight 990 Lbs.
Additional Info: Advantages of drilling from below
(1) safer because the drill bits are covered by the work piece, (b) cleaner work table, (c) Immediate stackable panels, (d) Faster drilling cycles, (e) Longer tool life, (f) Easy thru drilling with the use of the hydraulic oil brake cylinder and V-pointed bits - NO accidental drilling into the work table.
5 products. Displaying 1 to 5.