Rough Mill
13 products. Displaying 1 to 10. « < 1 - 2 > »
Kentwood Model No.: FD-01
Moulder Lateral Chain Infeed
Call (801)498-7891
HIGH PERFORMANCE MATERIAL HANDLING
Call (801)498-7891
SYSTEM TM Model No.: Opti-Feed 3000
Automatic infeed for short stock
The "Opti-Feed 3000" is an automatic infeed system designed so that the infeed speed of the workpiece is automatically adjusted to the speed of the machine, thus improving productivity by matching the higher machine speed. It is designed to handle short stock from 380mm to 2500mm (15" to 98") at a standard capacity of 50 workpieces or 5 layers per minute by uniform lengths. It is designed to infeed machines such as moulders, double end tenoners, resaws, and sanders. Changes in material length are easily made at the operator panel in seconds.
Call (801)498-7891
Details: Standard Features Include: Automatic speed regulation by the main machine (i.e. moulder, resaw, etc.) •• Automatic pack change •• Automatic length adjustment •• pallet can be placed directly on the floor because of the overhead portal design •• safety fence and safety barrier.
Standard Technical Specifications: material length - 380 to 2800mm (15"to 98") •• material length variation, Max. - +/- 5mm (3/16") •• material width - 50 to 300mm (2" to 12") •• material thickness - 15 to 100 mm (5/8" to 4") •• material weight, Max. - 20 kg (44 Lbs.) •• material layer weight, Max. - 80 kg (176 Lbs.) •• pack width, Max. - 1200 mm (48") •• Pack height, Max. - 1200 mm (48") •• main machine bed height: 850 to 900 mm (33"-35").
Additional Info:
SYSTEM TM Model No.: Opti-Feed 6000
Automatic infeed for long lengths
System TM's "Opti-Feed 6000" packages offer three (3) infeed solutions, matching your requirements with regard to feed speed, floor space and initial investment costs.
The "Opti-Feed 6000" is an automatic infeed system designed so that the infeed speed of the workpiece is automatically adjusted to the speed of the machine, thus improving productivity by matching the higher machine speed. It is designed to handle stock from 1200mm to 6100mm (4 ft to 20 ft) at a standard capacity of 40 workpieces per minute . It is designed to infeed machines such as moulders, double end tenoners, resaws, and sanders. Packs can easily and automatically be replaced during the production cycle without stopping the line.
Call (801)498-7891
Details: Standard Features Include: Automatic speed regulation by the main machine (i.e. moulder, resaw, etc.) •• Automatic pack change •• Tilt hoist •• Cross chain conveyor •• Valley separator •• Cross chain conveyor with single piece feeding •• safety fence and safety barrier.
Standard Technical Specifications: material length - 1800 to 6100 mm (6 ft to 20 ft) OR 1200 to 4800 mm (4ft to 16 ft) •• material width - 50 to 300mm (2" to 12") •• material thickness - 15 to 100 mm (5/8" to 4") •• material weight, Max. - 40kg (88 Lbs.) •• pack width, Max. - 1200 mm (48") •• Pack height, Max. - 1200 mm (48") •• Pack weight, Max - 4000 kg (8800 Lbs.) •• main machine bed height: 850 to 900 mm (33"-35").
Additional Info: Optional Equipment: Pack rollers •• Pack chains •• Equipment for edge protection and noise reduction •• Stick belt •• stick collector •• Extra cross chain conveyor and reject gate •• equipment for feeding random width material •• equipment for feeding 25 mm (1") wide boards •• Automatic core bend and material turner
SYSTEM TM Model No.: Opti-Stack 3000
Automatic off-stacker for short stock
The "Opti-Stack 3000" is an automatic high performance stacking system designed so that the stacking speed of the parts is automatically adjusted to the speed of the machine (i.e. moulder, cross cut saw, tenoner, etc) at a standard rate of 85 pieces per minute, thus increasing the productivity of the line system. The standard modular design allows us to connect the stacker to a variety of different types of machines, such as moulders, cross-cut saws, sanders, Etc. It can be customized to meet your exact manufacturing requirements. The "Opti-Stack 3000" is the fifth generation of stacking machines from System TM, thus it represents years of knowledge and practical experience in stacker design. The "Opti-Stack 3000" is designed to handle short parts from 380 - 2500 mm (15" - 98") at a standard capacity of 85 uniform length parts or 8 uniform length layers per minute.
Call (801)498-7891
Details: Standard Features Include: sorting belt •• mechanical sweeping unit •• belt conveyors •• Stacking trays •• Pack Elevator •• Safety perimeter fence.
Technical Specifications: part length: 380-2500 mm (15" - 98") •• part width: 50-200 mm (2"-8") •• part thickness: 15-75 mm (5/8" - 3") •• part weight, Max: 12 kg (27 lbs) •• layer weight, Max: 80 kg ( 176 Lbs) •• pack width: 800 / 1200 mm (31" / 48") •• pack height, Max: 1200 mm (48") •• saw height: 850 +/- 50 mm (33-1/2" +/- 2") •• Standard capacity: 85 parts or 8 layers per minute
Additional Info: Optional Equipment: Stick magazines •• Brick and zig-zag stacking •• Fixed pack chains •• Adjustable pack chains •• Pack rollers •• automatic length adjustment •• Increase maximum width 200-300 mm (8"-12")
SYSTEM TM Model No.: Optistack 3000
Semi-automatic off-stacker after horizontal band resaw
Call (801)498-7891
SYSTEM TM Model No.: Optistack 6000
Automatic Off-stacker for long lengths
System TM's "Opti-Stack 6000" packages offer three (3) off-stacking solutions, matching your requirements with regard to feed speed, floor space and initial investment costs.
The "Opti-Stack 6000" is an automatic ioffstacking system designed so that the stacking speed of the workpiece is automatically adjusted to the speed of the machine, thus improving productivity by matching the higher machine speed. It is designed to handle stock from 1200mm to 6100mm (4 ft to 20 ft) at a standard capacity of 40 workpieces per minute . It is designed to off-stack machines such as moulders, double end tenoners, resaws, and sanders.
Call (801)498-7891
Details: Standard Features Include: Acceleration belt conveyor with frequency inverter drive •• Rising stud carrier with alignment rollers •• Layer stacker with non-marking chains and frequency inverter drive on forks •• Pack elevator •• safety fence and safety barrier.
Standard Technical Specifications: material length - 1800 to 6100 mm (6 ft to 20 ft) OR 1200 to 4800 mm (4ft to 16 ft) •• Length variation, Max: 30% •• material width - 50 to 300mm (2" to 12") •• material thickness - 15 to 100 mm (5/8" to 4") •• material weight, Max. - 40kg (88 Lbs.) •• pack width, Max. - 1200 mm (48") •• Pack height, Max. - 1200 mm (48") •• Pack weight, Max - 4000 kg (8800 Lbs.) •• Main machine speed, Max: 120 M/Min (400 FPM) •• Standard capacity: 40 parts per Min. or 5 layers per Min. •• main machine bed height: 850 to 900 mm (33"-35").
Additional Info: Optional equipment: Pack rollers •• Pack chains •• part turning device •• Brick Stacking •• Stick magazines •• Reject gate •• Pack elevator in pit and horizontal stud carrier •• Extra chain carriers (6 total) for minimum part thickness of 12 mm (1/2") •• Higher infeed speed to match main machine's speed.
Call (801)498-7891
Woodstorm Automation Model No.: RF-16
Gang Ripsaw Infeed
The RF-16 is designed to go in front of gang rip saws with the intention of creating a more accurate, more efficient and safer workspace. The heart of the RF-16 is its 17' long, joystick-controlled infeed fence which is used to align boards in a perfectly straight line with the laser lights of the saw. The fence itself is built of heavy walled steel tubing and is mounted on a highly accurate motor driven linear motion system. The roller deck of the RF-16 is built of precision welded steel parts and employs heavy walled steel idler rollers with precision roller bearings to provide quiet, easy rolling. A robust steel frame provides the foundation for all these elements.
** System Operations **
The infinitely variable fence of the RF-16 has two speed, dual mode operation with joystick control.
** Two Speed Operation **
When a board has been placed on the roller deck, the operator pushes it against the fence and then positions the fence to the desired relationship with the laser lights of the saw. To do this he only has to push or pull the joystick in the appropriate direction--forward or backward. Moving the joystick to the first position in either direction causes the fence to move very slowly for highly accurate positioning. If a large distance needs to be covered in order to skip a saw pocket or two, the joystick is pulled a bit further and the fence moves at 6+" per second. Maximum travel of the fence from the default fence position is +8"/-1.5". **
The stopping/starting response of the fence through the joystick is instantaneous offering your operator an almost unobstructed approach to proper optimizing of the board at hand.
** Dual Mode Operation **
Adjacent to the joystick on the operator’s control panel is a two position selector switch offering either automatic or manual fence operation.
In the automatic mode, the fence will always return to the home/fence line position after each board is fed into the saw. The operator simply places the board on the roller deck, positions the fence for the desired cut and pushes the board into the saw. When the board has entered the saw, the fence will automatically return to the default fence line position (at 6+" per second) while the operator is securing the next board to be cut. Valuable downtime between ripping is saved by not having to reposition the fence out of the way.
With the switch in the manual position, the fence stays where the operator last positioned it. This function is particularly handy when the operator wants to work with one specific arbor pocket such as in the case of re-ripping off fall or when working with nominally sized lumber. In the manual mode, the fence is still fully adjustable for variations in each board, but the time it would take to move the fence from the default fence line position used in the automatic mode has been eliminated.
The operation of the selector switch is instantaneous and allows rapid switching between modes.
** System Details **
The fence of the RF-16 is built to be enduringly accurate. The fence tube itself is selected for straightness and then attached to a rack-and-pinion torsion bar to assure that the fence tracks in parallelism without deflection or vibration. This industrial strength linear motion assembly is then connected to a brake-gear motor which is controlled by an AC inverter drive.
A custom programmed PLC controls all operations adding to the precision and ease of operation of the RF-16.
The RF-16 is factory tested and is shipped completely assembled and ready for immediate installation and use.
Call (801)498-7891
Additional Info: Available in other custom lengths.
Wood Storm Model No.: LR-R and BAF-R
Moulder Lateral Chain Infeed
Some floor plans and applications demand that the moulder be fed from the back side (left-to-right feeding). At WoodStorm, this isn't an afterthought; it's a whole separate design element. Our LR-R and BAF-R series lateral chain feeders are built on rolling carriages with rack-and-pinion guidance and inverter driven brake motors for quick, easy and accurate positioning.
Call (801)498-7891
Details: Features:
Unique "on-demand" chain deck operation lets you run random, short and re-sawn material with minimum effort ***
Inverter drives give intelligent, durable and powerful performance while eliminating the inefficiencies and mess of hydraulics ***
Run re-sawn wedges (up to 20 degrees) without tilting feed works or beveled wheels ... and at no extra cost ***
"Open-arm" frame design allows for coupling with other processes (i.e., rip saws, optimizing saws, panel saws, re-saws, etc.)