Miter saws
13 products. Displaying 1 to 10. « < 1 - 2 > »
CTD Model No.: M25R
Quick Index 12" Miter Saw
This rugged, accurate heavy duty industrial indexing
mitre cut-off saw uses our time tested 200 series
sawhead. It will mitre up to 45 degrees each side
of 0 degrees, with positive pin stops at 45, 30, 22 ½,
15, 0, 15, 22 ½, 30, and 45 degrees. **
STANDARD FEATURES
:
Blade Capacity: 12" OD (305mm) standard.
Spindle & Pivot Shaft have preloaded, sealed ball
bearings; .001 alignment of spindle and pivot.
Arbor is 1" (25.4mm) OD with 2-1/2" (64mm) saw collars;
3700 RPM.
Motor: 2 H.P. 1 or 3 Phase totally enclosed fan cooled
with toggle switch; enclosed 2-belt drive.
Iron Castings: Base & disc are made from precision
machined iron castings for lasting accuracy. Disc is
set flush with table and graduated each degree.
Blade Guard: Completely encloses blade in rest position.
Lower rotating blade guard pivots up into main stationary
blade guard as saw heads pivot down to cut.
Actuation: Manual hand operation; optional
power feed of saw head.
Dust Outlet: Two 2" dust outlet provided. 600 CFM
required for each.
Size & Weights: 22" (56cm) Wide x 27" (69cm)
Front to Back x 22-1/2" (57cm) High. Weight 150 lbs.(68 kgs).
Call (801)498-7891
Details: Technical Specifications:, Cutting Capacity with fences set at center line:
45° 2-1/2"(64mm) High x 3-1/2"(89mm) Wide -
90° 2-1/2"(64mm) High x 5"(127mm) Wide **
Maximum Cutting Capacity: 45°
12" Blade Capacity (305mm)
2-5/8"(67mm) High x 4-1/4" (108mm) Wide **
Maximum Cutting Capacity: 90°
12" Blade Capacity (305mm)
2-1/2"(64mm) High x 7-1/2" (191mm) Wide
Additional Info: Optional extras: Power Downfeed of Saw;
Clamps; Magnetic Starters; Floor Stand;
Measuring Fences; TigerStop gaging systems and Table Supports.
CTD Model No.: M416 / M516
16" and 20" Miter Saw
The CTD M416 / M516 Series Cut Off Saws are designed for
heavy duty production cutting of aluminum, wood,
plastics and steel. These rugged, heavy duty
machines offer years of precision cutting.
STANDARD FEATURES:
Blade Capacity: Models M416 16” OD
(406mm); Models M516 20” OD (504mm);
saw blades not included. **
Arbor: 1” (25mm) with 5” (127mm) saw collars. **
Spindle & Pivot: Spindle mounted on preloaded
and sealed bearings; with V-belt drive completely
enclosed; pivot uses Timken bearings lubricated for life. **
Motor & Starter: 7-1/2 H.P. 3 Phase 230/460 Volt
Totally Enclosed Fan Cooled Motor with Magnetic
Starter standard. **
Floor Stand: Heavy gage steel sheet and angle. **
Table Base: Precision machined cast iron base with
milled keyways to guide fences; disc set flush with base. **
Dust Outlet: Two 4” (102mm) outlets provided -
1200 CFM required. **
Production Rate: Up to 10 strokes per minute;
actual production rates will vary with the type
and width of the material to be cut. **
Actuation: Hand operated standard. **
Air Pressure & Consumption: 3 CFM at 80 PSI
(.09 cubic meters/minute at 5.6 kg/cm2) based on
10 strokes per minute; air filter/regulator/lubricator
with auto drain included. **
Size & Weight: 48” (122cm) Wide x 40” (102cm)
Front to Back x 70” (178cm) High. **
Weight is 850 lbs. (386kg).
Call (801)498-7891
Details: Optional Equipment:10 H.P. & 15 H.P. motors;
Power Downfeeds of Sawheads actuated by
Two-Hand, Anti-Tie Down Maintained Contact
Safety Control.
CTD Model No.: CM325R
12" Compound Miter Saw
The Model CM325R
saw incorporates most of the standard features
found on the CDM300R double miter saw. In addition, the CM325R
will mitre up to 45° to the left of 0°, and up to 60°
to the right of 0°.
STANDARD FEATURES:
Blade Capacity: 12” OD (305mm); saw blades not included. **
Arbor: 1” (25mm) with 2-1/2” (64mm) saw scollars;
3700 RPM of spindle. **
Motor & Voltages: 3 H.P. 3 Phase 230/460 Volt Totally
Enclosed Fan Cooled Motor, 60 Hz 3450 RPM; optional
starter available for voltage protection. **
Compound of Tilting Angle: Saw head will compound
angle cut up to 45° in direction shown, with positive pin
stops at 90°, 22-1/2°, and 45°. Saw will cut up to 10° on
the other side of the vertical plane. **
Actuation: Hand operated standard.
Call (801)498-7891
Details: Cutting Capacity: 45° Mitre; 3-1/4” (82mm) High x 5”
(127mm) Wide 90° Straight Cut; 2-1/2” (63mm) High x 7”
(178mm) Wide 90° Front to Back/45° Compound;
1” (25.4mm) High x 7” (178mm) Wide
Additional Info: optional power
down feeds of sawheads actuated by Two-Hand,
Anti-Tie Down Maintained Contact Safety Control.
CTD Model No.: CM60
16" Compound Miter Saw
These saws cut your costs, are accurate, rugged, and give
long life. They cut wood, plastic, and non-ferrous metals
with high speed and carbide blades, and abrasive cut steel.
The CM60 is a single head version of the Model CDM60.
STANDARD FEATURES
& SPECIFICATIONS:
Blade Capacity: 16” (406mm); saw blades not included. **
Arbor: 1” (25mm) with 3-1/2” (89mm) saw collars;
mounted on preloaded and sealed bearings; 2-belt
drive centered between bearings; 2800 RPM of spindle. **
Motor & Voltages: 3 H.P. 3 Phase 230/460 Volt Totally
Enclosed Fan Cooled Motor, 60 Hz, 1725 RPM with starter;
5 H.P. available as an optiona at additional cost. **
Actuation: Hand operated standard. **
Call (801)498-7891
Details: Technical Specifications:
Cutting Capacity: 45° Mitre; 4” (102mm) High x 7-1/4”
(184mm) Wide - 90° Straight Cut; 4” (102mm) High x 10-1/2”
(267mm) Wide - 90° Front to Back/45° Compound; 2-5/8”
(67mm) High x 10” (254mm) Wide.
Additional Info: Optional Equipment: power
downfeeds of sawheads actuated by Two-Hand,
Anti-Tie Down Maintained Contact Safety Control;
Clamps, Measuring Fences; TigerStop gaging systems and Table Supports.
Omga Model No.: MEC-300-ST
12" Heavy Duty Belt Drive Miter Saw
The most popular of models of OMGA's Precision Mitre Saws. Positive stops at 45, 30, 22 1/2, 15 and 10 degrees on both sides of the rotation and an independently fine tunable one at 90 degrees. A manual locking device for all the intermediate angles provides great flexibility to this unit. The belt driven transmission and a powerful 2.2 HP induction motor make of the MEC 300 ST the ideal tool for heavy duty industrial usage. This machine is designed to be fitted with a wide variety of optional accessories to make it perfect for any application. This precision saw is a multi purpose machine suitable for use in general carpentry, for cutting moulding, picture frames, furniture components and any application requiring precision cutting.
Call (801)498-7891
Details: OPTIONAL EQUIPMENT Cabinet stand; 4 ft flip stop gage; TigerStop gaging system
Omga Model No.: T55-300
12" Heavy Duty Direct Drive Miter Saw
The perfect compromise for accuracy, toughness and ease of use. Positive stops at 45, 30, 22 1/2, 15 and 10 degrees on both sides of the rotation and an independently fine tunable one at 90 degrees. A manual locking device for all the intermediate angles provides a great flexibility to this unit. The direct drive transmission and a powerful 1.6 HP induction motor make of the T 55 300 the ideal tool for heavy duty industrial usage. This machine is designed to be fitted with a wide variety of optional accessories to make it perfect for any application. This precision saw is a multi purpose machine suitable for use in general carpentry, for cutting moulding, picture frames, furniture components and any application requiring precision cutting. Available in "SACA" combination designed specifically for high precision picture frame cutting.
Call (801)498-7891
Details: OPTIONAL EQUIPMENT Cabinet stand; 4 ft flip stop gage; TigerStop gaging system
Omga Model No.: T-50-350
14" Heavy Duty Belt Drive Miter Saw
The heaviest duty of all model of OMGA's Precision Mitre Chop Saws (along with the T 53 350). It features a solid cast iron base and head construction. The rotating table rides on roller bearings for maximum smoothness and accuracy. Positive stops at 45, 30, 22 1/2, 15 and 10 degrees on both sides of the rotation and an independently fine tunable one at 90 degrees. A manual locking device for all the intermediate angles provides a great flexibility to this unit. The belt driven transmission and a powerful 3 HP induction motor make of the T 50 350 the ideal tool for heavy duty industrial usage. This machine is designed to be fitted with a wide variety of optional accessories to make it perfect for any application. This precision saw is a multi purpose machine suitable for use in general carpentry, for cutting moulding, picture frames, furniture components and any application requiring precision cutting.
Call (801)498-7891
Omga Model No.: T53-370
14" Heavy Duty Belt Drive Compound Miter Saw
Heavy duty and flexible are the two main features of this Compound Precision Mitre Chop Saw. Positive stops at 45, 30, 22 1/2, 15 and 10 degrees on both sides of the rotation and an independently fine tunable one at 90 degrees. A manual locking device for all the intermediate angles provides a great flexibility to this unit. The unit is also equipped with a 45 degree positive stop for precision beveling. The belt driven transmission and a powerful 4 HP induction motor make the T 53 370 the ideal tool for heavy duty industrial usage. This machine is designed to be fitted with a wide variety of optional accessories to make it perfect for any application. This precision saw is a multi-purpose machine suitable for use in general carpentry, for cutting crown moulding, picture frames, furniture components and any application requiring precision cutting.
Call (801)498-7891
Details: OPTIONAL EQUIPMENT Cabinet stand; 4 ft flip stop gage; TigerStop gaging system
CTD Model No.: DM200R
12" Double End Miter Saw
Spindle & Pivot: Uses CTD's time tested 200R Series Saw Head;
precision ball bearing spindle and pivot shaft are sealed and
preloaded for guaranteed accuracy; .001 alignment of spindle
and pivot shaft. **
Blade Capacity: 12” OD (305mm); saw blades not included. **
Arbor: 1” (25mm) with 2-1/2” (64mm) saw collars; 3700 RPM
of spindle. **
Motors & Voltages: 2 H.P. 3 Phase 230/460 Volt Totally
Enclosed Fan Cooled Motors, 60 Hz, 3450 RPM, with
starters and voltage protection; 3 H.P. 3 Phase motors available. **
Iron Castings: Tables are precision machined and ground iron
castings with milled keyways in tables to guide fences. **
Table: Saw heads swivel from 90° to 45° towards each other with degree markings and pointer; stops are at 90° and 45°; angular adjustment of saw head away from each other available as option; other angles possible; phenolic chip breaker included. **
Floor Stand: Heavy gage steel; eight foot centers with traveling right hand carriage on rack and pinion; length measuring scale; optional length centers available to 40 feet (12M); Digital Length Measurement available as optional accessory. **
Blade Guard: Completely encloses blade in rest position. Lower rotating blade guard pivots up into main stationary blade guard as saw heads pivot down to cut. **
Fences: On each side of blade are keyed to base and are easily adjustable front to back, and side to side. **
Actuation: Two inside vertical clamps must be tripped by foot valve, then a two-hand anti-tie down, maintained contact safety control will work the air downfeed of saw heads. An air filter/regulator/lubricator with auto drain is provided. **
Air Pressure & Consumption: 75 PSI (5.2kg/cm2); 3 CFM at 75 PSI (.09 cubic meters at 5.2 kg/cm2), based on 10 strokes per minute. **
Dust Collection: Four, 2” round (51mm) outlets are provided, two on each saw head for DM200R; 800 CFM required per saw head. **
Production Rates: 10 strokes per minute; actual production rates will vary with type and width of material to be cut. **
Size & Weight: 32” (81cm) front to back x 64” (163cm) High x 120” (305cm) Long; Weight 1,050 lbs. (476kg). **
Call (801)498-7891
Details: Cutting Capacity:
90° Straight Cut
2” (51mm) High x 7-3/4” (197mm) Wide **
45°Mitre Cutting
1-1/2” (38mm) High x 4-7/8 (123mm) Wide
Additional Info: Optional extras: Power Downfeed of Saw;
Clamps; Magnetic Starters; Floor Stand;
Measuring Fences; TigerStop gaging systems and Table Supports.
CTD Model No.: CDM-300R
Double End Compound Miter Saw
The CTD Model CDM300R is CTD's most versatile 12”
Double End Saw. It is capable of mitering and compound
mitering simultaneously. It’s design incorporates
calibrated angle settings and quadrants for fast,
accurate set-ups. The CDM300R is available with
many options and lengths.
STANDARD FEATURES & SPECIFICATIONS:
Blade Capacity: 12” OD (305mm); saw blades not included.**
Spindle & Pivot: Precision ball bearing spindle and pivot
shaft are sealed and preloaded for guaranteed accuracy;
.001alignment of spindle and pivot shaft. **
Arbor: 1” (25mm) with 2-1/2” (64mm) saw collars;
3700 RPM of spindle. **
Motors & Voltages: 3 H.P. 3 Phase 230/460 Volt
Totally Enclosed Fan Cooled Motors, 60 Hz,
3450 PRM, with starters and voltage protection. **
Iron Castings: Tables are precision machined
and ground iron castings with milled keyways
in tables to guide fences. **
Table: Saw heads swivel from 90° to 45° towards
each other with degree markings and pointer;
stops are at 90° and 45; angular adjustment of saw
head away from each other available as option;
other angles possible; phenolic chip breaker included. **
Compound of Tilting Angle: Saw head will compound
angle cut up to 45° in direction shown with positive
pin stops at 90°, 22-1/2°, and 45°; bottom of blades
point towards each other; saw will also compound
cut up to 10° on other side of vertical plane. **
Floor Stand: Heavy gage steel; eight foot centers
with traveling right hand carriage on rack and pinion;
length measuring scale. ** Blade Guard: Completely encloses blade in rest
position; lower rotating blade guard pivots up into
main stationary blade guard as saw heads pivot
down to cut. **
Fences: On each side of blade are keyed
to base and are easily adjustable front to back
and side to side. **
Actuation: Two inside vertical clamps must be tripped
by foot valve, then a two-hand anti-tie down, maintained
contact safety control will work the air downfeed of
saw heads; an air filter/regulator/lubricator with auto
drain is provided. **
Call (801)498-7891
Details: Air Pressure & Consumption: 75 PSI (5.2kg/cm2);
4 CFM at 75 PSI (.11 cubic meters at 5.2 kg/cm2);
based on 10 strokes per minute. **
Dust Collection: Four, 4” round (102mm) outlets are
provided, two for each saw head; 900 CFM required
per saw head. **
Production Rates: 10 strokes per minute; actual
production rates will vary with type and width
of material to be cut. **
Size & Weight: 32” (81cm) front to back x 64” (163cm)
High x 120” (305cm) Long; Weight 1,200 lbs. (544kg). **
Cutting Capacity: 90° Straight Cut;
2-1/2” (64mm) High x 7” (178mm) Wide **
45° Mitre;
3-1/2” (89mm) High x 3-1/2” (89mm) Wide **
90° Front to Back/45° Compound;
1” (25mm) High x 7” (178mm) Wide
Additional Info: optional length centers
available to 40 feet (12M); Digital Length Measurement
available as optional accessory.