Plastics Cutting
43 products. Displaying 1 to 10. « < 1 - 2 - 3 - 4 - 5 > »
Onsrud Cutter Model No.: 37-51
Carbide tipped, double edge - V bottom
1/4" cutting edge diameter; 3/4" cutting edge length; 1/4" shank diameter; 2" OAL; 3°-5° shear helix angle. Designed for v-grooving or beveling 90°. Used for cutting soft plastics- i.e. Polycarbonate, ABS, HIPS, PET, extruded acrylic, polystyrene, polypropylene, PE, PVC acetal and UHMW.
Call (801)498-7891
Onsrud Cutter Model No.: 38-50
Double edge, round bottom, solid carbide bit
1/8" cutting edge diameter; 3/8" cutting edge length; 1/4" shank diameter; 2" OAL. Round bottom tools featuring upshear action for grooving and decorative face cutting. 2° - 4° shear helix angle. Used for cutting soft plastics- i.e. Polycarbonate, ABS, HIPS, PET, extruded acrylic, polystyrene, polypropylene, PE, PVC acetal and UHMW.
Call (801)498-7891
Onsrud Cutter Model No.: 38-52
Double edge, round bottom, solid carbide bit
1/4" cutting edge diameter; 3/4" cutting edge length; 1/4" shank diameter; 2" OAL. Round bottom tools featuringupshear action for grooving and decorative face cutting. 2° - 4° shear helix angle. Used for cutting soft plastics- i.e. Polycarbonate, ABS, HIPS, PET, extruded acrylic, polystyrene, polypropylene, PE, PVC acetal and UHMW.
Call (801)498-7891
Onsrud Cutter Model No.: 52-622
Double edge, solid carbide, spiral "O" flute UPCUT bit
1/4" cutting edge diameter; 3/8" cutting edge length, 1/4" shank diameter, 2-1/2" OAL. Designed with free cutting "O" flute geometry along with a double flute design for smooth finish on hard and soft plastics i.e. Nylon, Polycarbonate, ABS, HDPE, PET, acrylic, PE, PVC acetal and UHMW.
Call (801)498-7891
Onsrud Cutter Model No.: 52-638
Double edge, solid carbide, spiral "O" flute UPCUT bit
3/8" cutting edge diameter; 1" cutting edge length, 3/8" shank diameter, 3" OAL. Designed with a low helix, free cutting "O" flute geometry along with a double flute design for smooth finish and upward chip flow on hard and soft plastics i.e. Nylon, Polycarbonate, ABS, HDPE, PET, acrylic, PE, PVC acetal and UHMW.
Call (801)498-7891
Onsrud Cutter Model No.: 52-650
Double edge, solid carbide, spiral "O" flute UPCUT bit
1/2" cutting edge diameter; 1-1/8" cutting edge length, 1/2" shank diameter, 3-1/2" OAL. Designed with a low helix, free cutting "O" flute geometry along with a double flute design for smooth finish and upward chip flow on hard and soft plastics i.e. Nylon, Polycarbonate, ABS, HDPE, PET, acrylic, PE, PVC acetal and UHMW.
Call (801)498-7891
Onsrud Cutter Model No.: 52-652
Double edge, solid carbide, spiral "O" flute UPCUT bit
1/2" cutting edge diameter; 1-5/8" cutting edge length, 1/2" shank diameter, 3-1/2" OAL. Designed with a low helix, free cutting "O" flute geometry along with a double flute design for smooth finish and upward chip flow on hard and soft plastics i.e. Nylon, Polycarbonate, ABS, HDPE, PET, acrylic, PE, PVC acetal and UHMW.
Call (801)498-7891
Onsrud Cutter Model No.: 52-655
Double edge, solid carbide, spiral "O" flute UPCUT bit
1/2" cutting edge diameter; 2-1/8" cutting edge length, 1/2" shank diameter, 4-1/2" OAL. Designed with a low helix, free cutting "O" flute geometry along with a double flute design for smooth finish and upward chip flow on hard and soft plastics i.e. Nylon, Polycarbonate, ABS, HDPE, PET, acrylic, PE, PVC acetal and UHMW.
Call (801)498-7891
Onsrud Cutter Model No.: 52-664
Double edge, solid carbide, spiral "O" flute UPCUT bit
3/4" cutting edge diameter; 3-1/8" cutting edge length, 3/4" shank diameter, 6" OAL. Designed with a low helix, free cutting "O" flute geometry along with a double flute design for smooth finish and upward chip flow on hard and soft plastics i.e. Nylon, Polycarbonate, ABS, HDPE, PET, acrylic, PE, PVC acetal and UHMW.
Call (801)498-7891
Onsrud Cutter Model No.: 52-703
Double edge, solid carbide, upcut spiral "O" flute bit
1/8" cutting edge diameter; 3/8" cutting edge length, 1/4" shank diameter, 2" OAL. Designed with a High helix, free cutting "O" flute geometry along with a double flute design for smooth finish and upward chip flow on soft plastics - i.e. Nylon, Polycarbonate, ABS, HDPE, PET, acrylic, PE, HDPE, acetal, UHMW and solid surface. Has a special point geometry for improved bottom finish.
Call (801)498-7891