COMPOSITES CUTTING
9 products. Displaying 1 to 9.
Onsrud Model No.: 30-000 series
Replaceable ring type Honeycomb cutters
These tools are for contouring, carving and chamfering cuts of 0.25" or less. The unique patented holding system prevents the solid carbide blades from coming out of the holder if fractured. *** The HSS saw blades and the diamond plated blades dish on the bottom so they clear the cut core finish like the hollow groung solid carbide style rings. The solid carbide rings may be re-ground several times at the factory making them very economical to use. *** The HSS saw and diamond plated blades are disposable, offering the convenience of a constant diameter.
Call (801)498-7891
Onsrud Model No.: 30-300 series
PM-HSS Integral Shank Honeycomb Hogger Cutter
The "Super PM" HSS steel hoggers spiral geometry ground integral to the shank allows for faster feed rates and deeper cuts than any previous cutter. The availability of several different blades makes this cutter suitable for most core types. The new hogger design also imparts less force as it evacuates and shreds scrap. Uses replaceable diamond plated, solid carbide, or HSS replaceable blades.
Call (801)498-7891
Onsrud Model No.: 31-000 series
High Speed Steel Cutter
This cutter is designed primarily for use on aluminum core, offering the versatility of smaller sizes for use on hand-held machines in the field or maintanence type repairs. This cutter offers the strength of an integral shank and blade that has an edge sharpeness unattainable with any other type material. The sharpeness and the relieved bottom yield part surfaces that require a minimum of preparation before bonding operation.
Call (801)498-7891
Onsrud Model No.: 32-000 series
PM High Speed Steel Hogger
These cutters are specifically designed for fast (low force) removal of excess core followed by a final finish pass to obtain excellent finishes with one tool. These cutters enable cuts of up to 0.60" depths in a single pass. The availability of several different blades makes this cutter suitable for most core types. ALL ASSEMBLIES REQUIRE A SHANK, HOGGER CUTTER, AND BLADE.
Call (801)498-7891
Onsrud Model No.: 34-000 series
Aircraft Panel Tools
This modular tool is designed to produce slots in composite panels so potting compound can be applied to strengthen the edge, This tool consists of a PCD arbor which accepts a PCD Diamond grit or HSS under cutting tool screwed to it. Suitable for use on "Nomex" (tm) cores or aluminum panels with aluminum cores, depending on blade type selected.
Call (801)498-7891
Onsrud Model No.: 54-000 series
Four edge solid carbide, spiral, downcut
Equally adaptable to low or high spindle speed applications in any CNC environment. The free cutting action provides for better finishes in cutting Composites, fiberglass and phenolics. 30Deg. Helix angle.
Call (801)498-7891
Onsrud
Solid Carbide Fiberglass Router Bits
Designed as fiberglass. Their upcut / downcut diamond design effectively shears fibrous materials. Certain tools have been furthur designed to cut aramid fiber composites. Available with diamond coating Available in other lengths and diameters than shown below.
Call (801)498-7891
Onsrud
Three Edge Phenolic Cutter Bit
Adaptable to low or high spindle speed applications in any CNC machining requirement. The free cutting action of the tools provides better finishes and significantly reduced noise levels.
Call (801)498-7891
Onsrud
Solid Carbide FGR (Aramid) bit
Developed to cut Aramid fiber
Call (801)498-7891
9 products. Displaying 1 to 9.