Aggregates
13 products. Displaying 1 to 10. « < 1 - 2 > »
Model No.: SPECIFY: MACHINE MAKE, MODEL, SPINDLE TYPE
CALL FOR COMPETITIVE PRICES
Call (801)498-7891
Benz Gmbh Model No.: UTU
Undersurface trimming aggregate
Specially designed for the low to moderate duration machining of the unside of your workpiece, this aggregate requires that the part be elevated either on vacuum pods or a fixture. With a maximum raech of up to 6" from the edge of the workpiece, this aggregate can be designed to fit your specific application.
Call (801)498-7891
Details: Maximum input rpm - 15,000 rpm, maximum output rpm - 15,000 rpm ** Maximum torque @ 15,000 rpm - 10Nm ** gear ration - 1:1 ** approx weight - 5.5 Kg (12 Lbs.) ** tool outlet - "flush mount" ER25 or Weldon 12mm ** Max. operating temperature 85 Deg. C (185 Deg. F)
Additional Info: ISO-30, SK-30, HSK-63F, BT-35 tapers
Benz Gmbh
Multiple spindle drill aggregate
The Benz vertical (can also be used horizontally) multiple spindle drill head was designed for light to moderate duration line boring operations. Ideal for CNC machines which are not equipped with a dedicated drill head. This aggregate can be equipped with Weldon straight shank (10mm) connections or with ER16 nut and collets. It is available with three (3), five (5) or seven (7) spindles. In the horizontal configuration this unit is available as a single or double sided outlet. PRICING SHOEWN IS FOR THE FIVE (5) SPINDLE HEAD>
Call (801)498-7891
Details: spindle pitches available; 25mm (inch), 30mm (1-1/4"), 32mm ** maximum rpm - input 10,000 rpm, output 10,000 rpm ** maximum torque - 5 Nm ** gear ratio - 1:1 ** weight - 7 Kg (16 Lbs.) ** tool outlet Weldon 10mm, ER16 collet system (30mm & 32mm pitch only)
Additional Info: ISO-30, SK-30, HSK-63F, BT-35 tapers
Benz Gmbh Model No.: Pro-Lock
Tool holder / Aggregate benchtop holder
Ideal for work on aggregates. Makes it a snap to adjust or replace tools without the danger of dropping the agrregate on the floor. "Quick-Lever" clamp release system makes it easy to use. Easy tilt mechanism allows user to adjust angle for optimum access to tool holder or aggregate. Available with HSK-63F ONLY
Call (801)498-7891
Techniks Model No.: "Smart Line" DUO-SL
Intermediate duty dual side aggregate
The Techniks DUO - SL dual sided right angle head is designed for low use duration sawing, boring and milling operations. The unit is manually adjustable from 0 to 360 degrees on the horizontal plane. It comes standard with two outlet connections fixed at 90 degrees. The gear design allows these aggregates to be lubricated with a grease to allow intermittent duty cycle ( i.e. 5 min. on -10 min. off)
Call (801)498-7891
Details: Maximum input RPM - 10,000 rpm, output RPM - 15,000 rpm ** ratio: 1 to 1.48 ** Maximum Torque - 15 ft/lbs ** Tool outlet combination - ER25 collet / S saw or ER 32 collet / S saw ** weight - approx 3.5 Kg (8 Lbs.) ** Lubrication - Grease ** Maximum operating temperature - 70 Deg. C (160 Deg. F) ** Maximum sawblade Dia. - 150mm (6")
Additional Info: ISO-30, SK-30, HSK-63F, BT-35 tapers
Techniks Model No.: "Smart Line" Vario -SL
Intermittent duty adjustable angle aggregate
The Techniks "Smart Line Vario - SL adjustable angle single sided right angle head is designed for low use duration sawing, boring and milling operations. The unit is manually adjustable from 0 to 360 degrees on the horizontal plane and +100 to - 100 degrees in the vertical plane. Named for its versatility, this unit can be used with a router bit or saw blade and can easily be adjusted to machine a wide variety of angles. The latest gear design allows these aggregates to be grease lubricated for intermittent operation.(i.e 5 Min. on - 10 Min. off)
Call (801)498-7891
Details: Maximum input RPM - 12,000 rpm, output RPM - 12,000 rpm ** ratio: 1 to 1 ** Maximum Torque - 15 Ft/lbs ** Tool outlet combination - ER25 nut & collet (DIN 6499) ** weight - approx 4.5 Kg (10 Lbs.) ** Lubrication - Grease ** Maximum operating temperature - 70 Deg. C (160 Deg. F)
Additional Info: ISO-30, SK-30, HSK-63F, BT-35 tapers
Techniks Model No.: MONO-FL
Heavy Duty Single spindle GREASE LUBRICATED aggregate head
The Techniks MONO - FL single sided right angle head is designed for moderate up to high use duration sawing, boring and milling operations. The unit is manually adjustable from 0 to 360 degrees on the horizontal plane. It comes standard with one outlet connection fixed at 90 degrees in a medium body length. Body length can be increased or decreased for a surcharge. The gear design allows these aggregates to be lubricated with a grease to allow UP TO 100% duty cycle
Call (801)498-7891
Details: Maximum input RPM - 10,000 rpm, output RPM - 15,000 rpm ** ratio: 1 to 1.48 ** Maximum Torque - 15 Ft. Lbs ** weight - approx 4 Kg (9 Lbs.) ** Lubrication - Grease ** Maximum operating temperature - 85 Deg. C (185 Deg. F) ** Maximum sawblade Dia. - 160 mm (6-1/4") ** Tool outlet - combination ER25 , ER32, sawblade, special arbor.
Additional Info: Options: Combination ER25 and Saw; angle other than 90 degrees; longer spindle. ISO-30, SK-30, HSK-63F, BT-35 tapers
Techniks Model No.: DUO - FL
Heavy Duty Dual spindle right angle grease lubricated aggregate
The Techniks DUO - FL dual sided right angle head is designed for moderate to high use duration sawing, boring and milling operations. The unit is manually adjustable from 0 to 360 degrees on the horizontal plane. It comes standard with two outlet connections fixed at 90 degrees. The gear design allows these aggregates to be lubricated with a grease to allow UP TO 100% cycle
Call (801)498-7891
Details: Maximum input RPM - 10,000 rpm, output RPM - 15,000 rpm ** ratio: 1 to 1.48 ** Maximum Torque - 15 ft/lbs ** Tool outlet combination - ER25 collet / S saw or ER 32 collet / S saw ** weight - approx 3.5 Kg (8 Lbs.) ** Lubrication - Grease ** Maximum operating temperature - 85 Deg. C (185 Deg. F) ** Maximum sawblade Dia. - 150mm (6")
Additional Info: Options: longer spindles; combination ER25 collet and saw output. ISO-30, SK-30, HSK-63F, BT-35 tapers
Techniks Model No.: QUATTRO - FL
Heavy Duty Four side right angle grease lubricated aggregate
The Techniks QUATTRO - FL four sided right angle head is designed for moderate to high use duration sawing, boring and milling operations. The unit is manually adjustable from 0 to 360 degrees on the horizontal plane. It comes standard with four outlet connections fixed at 90 degrees in a short body length. Ideal for boring or machining on all four sides of a square or rectangular workpiece. If used on a machine equipped with "C" axis, four different types / sizes of tools can be utilized. The smaller overall dimensions and lighter weight make this an ideal head for small to medium sized CNC machines. The gear design allows these aggregates to be lubricated with a grease to allow UP TO 100% cycle.
Call (801)498-7891
Details: Maximum input RPM - 10,000rpm, output RPM - 15,000 rpm ** ratio: 1 to 1.48 ** Maximum Torque - 15 ft/lbs ** Tool outlet combination - (2) ER25 nut & collet & (2) ER32 collet & nut ** weight - approx 4.5 Kg (10 Lbs.) ** Lubrication - Grease ** Maximum operating temperature - 85 Deg. C (185 Deg. F)
Additional Info: ISO-30, SK-30, HSK-63F, BT-35 tapers
Techniks Model No.: VARIO - FL
Heavy Duty Adjustable angle right angle grease lubricated aggregate
The Techniks Vario - FL adjustable angle single sided right angle head is designed for moderate to high use duration sawing, boring and milling operations. The unit is manually adjustable from 0 to 360 degrees on the horizontal plane and +100 to - 100 degrees in the vertical plane. Named for its versatility, this unit can be used with a router bit or saw blade and can easily be adjusted to machine a wide variety of angles. The latest gear design allows these aggregates to be grease lubricated for UP TO 100% duty cycle.
Call (801)498-7891
Details: Maximum input RPM - 12,000 rpm, output RPM - 12,000 rpm ** ratio: 1 to 1 ** Maximum Torque - 15 Ft/lbs ** Tool outlet combination - ER25 nut & collet (DIN 6499) ** weight - approx 4.5 Kg (10 Lbs.) ** Lubrication - Grease ** Maximum operating temperature - 85 Deg. C (185 Deg. F)
Additional Info: ISO-30, SK-30, HSK-63F, BT-35 tapers