CNC Pod and Rail Machining Centers
3 products. Displaying 1 to 3.
LEGAL NOTICE
Call (801)498-7891
WEEKE Model No.: Optimat BP-85 (UM# 614)
Point - To - Point Machining Center with ATC - YEAR 1999
The BP-85 is constructed on a steel frame, with heavy steel ribs (gusset plates) welded to the frame inside the base to insure stability. The design and substantial mass provide a solid vibration-free platform for the machining head. The head rides on THK linear motion guides. The X-, Y-, and Z-axes are all supported on THK machine tool guides. THK guides were designed to produce straight line tracking at high travel rates, with outstanding stability--both in the radial and side directions. The X-axis is driven by a zero-backlash, pre-loaded, helically ground rack and pinion gear system. The Y and Z-axes are driven by high precision ball screw. Indramat solid state drives and brushless AC servo motors are utilized to move the axes. Vertical Boring with 11 Individually Selectable Spindles. Horizontal Boring with Six Individually Selectable Spindles. A 6.0 kW (8 HP)vertical router motor with an automatic tool changer (ATC) is located on the right side of the spindle carriage. The spindle motor utilizes grease sealed ceramic bearings for higher performance and maximum bearing life. This spindle also uses the HSK63 standard for the taper in the spindle and the accompanying tool holders. The router motor is equipped with a ride-along automatic tool changer to perform tooling changes during program execution. The X-axis grooving saw is powered by a 1.5 kW, 60 Hz motor. Six (6) panel support benches are supplied with the machine and have two (2) standard size vacuum pods each. A powerful vacuum pump with 40 cubic meters/hour capacity is suitable for both raw board (particleboard/MDF) and finished material (melamine or plastic laminate).Safety mats will assist in stopping the machine if the operator enters the working area while the machining head is in operation. The mats are divided into two (2) working zones so you may load or unload parts at one end of the machine while the machine continues to work on the opposite end. The machine is equipped with the Weeke 2000-PC continuous path control with intuitive programming software. Current approximate replacement cost is $109,000.00. Condition: approx. 400 Hrs use. - As taken from service.
Price: $45,900.00
Details: Number of vertical drilling spindles - 11 •• Vertical drilling spindle power - 1.5 kW •• Number of horizontal drilling spindles - 6 •• Horizontal drilling spindle power - 1.5 kW •• ATC router spindle power - 6.0 kW •• Tool magazine capacity - 6 tools •• HSK63 tool holder supplied - 2 •• Collet for HSK63 tool holder - 2 •• X-axis grooving saw power - 1.5 kW •• Saw blade diameter required - 100 mm •• Number of panel support benches - 6 •• Number of vacuum cups total - 14 •• Vacuum pump capacity - 40 M3/hr •• Length of machine - 4600 mm •• Width of machine - 3000 mm •• Height of machine - 2000 mm •• Working height - top of vacuum pods - 920 mm (36") •• Working length - 2750 mm •• Working width - support bench width - 900 mm •• Max. panel thickness for proper tool clearance - 60 mm (2-3/8") •• Max. drilling depth for through holes - 38 mm (1-15/32") •• Machine weight - 3000 kg (6,600 Lbs.) •• Axis stroke; Positioning speed for X-axis - 3105 mm; 60M/min •• Axis stroke; Positioning speed for Y-axis - 1020 mm; 50M/min •• Axis stroke; Positioning speed for Z-axis - 130 mm; 20M/min •• Electrical connection: 210, 240 or 480 volt, 3-phase, 60 Hz. •• Voltage supplied must not fluctuate in excess of +/- 5% of its stated value. •• Dust extraction: 200 mm diameter connection, 2000 cfm. ••
MASTERWOOD Model No.: PROJECT 416 (UM# 658)
4 AXIS CNC MACHINING CENTER WITH ATC -YEAR 2003
Masterwood's "top of the line" CNC machining center. Features full tool coverage working area of 132" X 54.7" - Max. material thickness of 4.3". Originally purchased to machine entry doors by small shop, before they decided to "pull the plug". Low hours considering the age. The machine "Cantilever" carriage support is made from stress releived steel, CNC machined and coated with an epoxy finish. Approximate current replacement cost is $178,000.00. Condition very good - as taken from service.
Price: $95,000.00
Details: Machines comes complete with: (6) manually positioned aluminum support benches • (12) vacuum support pods - 114mm X 140mm X 100mm height • (6) rear pop-up part locating pins, (6) intermediate pop-up pins for narrow parts, (2) RH side pop-up pins, (2) LH side pop-up pins • machine divided into (2) individual work zones • (4) panel lifting rails with (2) located in each zone • centralized lubrication system • AC Brushless servo motors • Becker rotary vane pump • 8 kW HSD air cooled electro-spindle with programmable "C" axis , inverter driven, with HSK-63F tool interface • 12 position ride along automatic tool changer • X-axis grooving saw • 1.5 kW, 20 spindle boring head (14 vertical - 6 horizontal) • SINCRO control with Microsoft windows operating system on the PC front end.
3 products. Displaying 1 to 3.