Single side banders
3 products. Displaying 1 to 3.
HOLZ-HER Model No.: 1424 Triathalon (UM #576)
3/4" Edge Capacity edgebander - YEAR 1996
Holz-Her 1424 "automatic" edgebander with micro-processor control. Max. 20 mm (3/4") solid wood banding and 3 mm PVC., 2-3/8" Max. panel thicknesss and 7" Min. panel length. Condition: Good - As Taken From Service. Approx. new replacement cost is $90,000.00
Price: $13,500.00
Details: Equipped with: Cartridge glue system with nozzle and quick melt; automatic magazine for coil and strip banding; HD guillotine for 3mm PVC; Pressure section with (1) large Dia. driven feed/pressure roll, (3) smaller idler pressure rolls all with pnuematic pressure; 1st large pressure roll with electronic speed control synchronized with feed chain. *** Type 1916.1 HD double motor end trim (0.75 HP each) with "unipoint" pivoting for 0 to 10 Deg. bevel trim controlled from operator panel. *** Type 1920 T/B flush trim unit (1.5 HP each) for chamfer and flush trim. *** T/B fine trim and radius trim units (0.75 HP each), 300 HZ HF, bevels 0 to 15 Deg. *** Type 1927 T/B profile scraping unit *** Type 1944 T/B buffing unit (0.25 HP each). *** Feed speeds of 26/56 FPM. *** Micro-processor control w/ LCD screen for line control, glue Temp., feed speed. *** Frequency inverter for trim unit *** Outboard panel support *** Sound enclosure *** RETURN CONVEYOR NOT INCLUDED IN PRICE
BRANDT Model No.: KDN 330B (UM# 665)
3 mm Capacity Edgebander with buffing - YEAR 2004
The KDN-330B is an extremely compact machine for processing edgebanding material up to 3mm. The machine comes with the proven Brandt glue system that has a heat up time of 12 Min. and features an automatic reduction of glue temperature if the machine is not run for 15 Min. This allows for a very fast return to operating temperature and prevents glue discoloration and charring. It features a two (2) motor end trim unit that rides on THK guideways and gives high precision cuts through a drawing cut. Straight/chamfer trimming adjustment by easily tilting the unit. Multi-functional trimming unit . Buffing unit. Precise and robust feed track and chain. Quick and easy adjustment for all common edgebanding materials.Condition: EXCELLENT; as taken from servic. Price EXCLUDES set up and training. Priced as-is, where is. Current Replacement cost is approximately $32,000.00.
Price: $20,000.00
Details: Machine length = 3050mm (10'); Connected load (Std. equipment)= 16A @ 230 volt; Feed speed= 9 M/min; Edgeband thickness= 0.4 to 3mm; Min. part length= 140 mm ;Working height= 850 mm; electrics= 208/230/440/480 volts, 3 phase, 60 Hz.; Weight 1700Lbs.
BRANDT Model No.: KD - 66/2 (UM# 602)
"Optimat" automatic edgebander with two (2) fine trim stations - YEAR 2003
PC-16 program control with color matrix LCD screen display and 8mb RAM. ***
Automatic height adjustment with top pressure beam for all work stations. ***
Equipped with digital height indicator. ***
Integrated electronic line control system for increased reliability and diagnostic assistance. No limit switches used for setting operating units. ***
Signal light at infeed to insure proper spacing of panels and error reduction at band infeed. ***
PC-16 Control located at machine infeed for operator convenience. ***
Universal automatic magazine for strip and coil feeding. ***
Extended infeed fence for easier feed of long workpieces. ***
Large coil table (800 mm diameter) to accommodate large coils of 3 mm PVC. ***
Hot melt granulate glue application system with approximately twelve minute heat-up time. ***
Quick-change glue tank for easy maintenance and glue color change, if necessary. ***
Reversible rotation of glue application roller. Retractable glue roller. ***
Strengthened precutter for cutting PVC (max. 3 x 45 mm) from the coil. ***
Infrared radiant quartz heating unit between glue roller and pressure zone for optimum gluing strength. ***
First pressure roller driven and two idle pressure rollers. ***
Double motor end trimming unit with straight and chamfer capability. Chamfer up to 15° and program controlled indexing from straight to chamfer. ***
Top and bottom fine trimming unit #1 with digital “Quickset” system. Tilt range 0 - 15° and program controlled indexing. ***
Top and bottom fine trimming unit #2 with digital “Quickset” system. Tilt range 0 – 15° and program controlled indexing. ***
Sound enclosure with centralized dust extraction outlet. ***
Top and bottom buffing unit. ***
Electronic frequency changer for all trimming motors which also incorporates electronic motor brakes. ***
Electrical components according to UL/CSA Listings. Condition: As Taken From Service Approximate replacement cost is $84,980.00
Price: $26,900.00
3 products. Displaying 1 to 3.