Through Feed Machines
7 products. Displaying 1 to 7.
LEGAL NOTICE
Call (801)498-7891
WEINIG Model No.: Profimat 23 (UM# 664)
6 HEAD MOULDER - YEAR 1995
Weinig P23 6 head moulder - head sequence B-R-L-T-T-B, working capacity of 9-1/16" X 4-11/16". ••
HEAD SEQUENCE & MOTOR HP: Bottom - 10HP • right/left - 10HP • 1st top - 15HP • 2nd top - 10HP • bottom - 10HP •• spindle diameter is 1-1/2" with cutterhead speed of 6,000 RPM. Mechanical DRO's for spindles 2-6 with both radial and axial adjustments. •• Equipped with 5-1/2 HP feed, with variable feed speed of 20-78 FPM. Cardan drive, motorized feed beam with pnuematic loaded wheels; receding chipbreakers for left and top spindles. •• Complete with 2 meter infeed straightening table with adjustable fence, central lubrication points and manual bed lubrication pump. NO TOOLING INCLUDED. Approximate current replacement cost is $56,000.00. Condition: GOOD- As taken from service.
Price: $18,900.00
Additional Info: OPTION: one set of NEW cutterheads consisting of (2) 100mm and (4) 230mm - $2250.00
WEINIG Model No.: (UM# 600)
Unimat GOLD 6 spindle moulder - YEAR: 2001
Six (6) spindle configuration (B-R-L-T-T-B) with a working capacity of 9-1/16" X 4-3/4". Horsepowers: Bottom - 10 HP; Right - 10 HP; Left - 10 HP; 1st Top 15 HP; 2nd Top - 20 HP; Bottom - 15 HP; 5.5 HP - feed drive. Mechanical spindle brakes on all spindle motors. 1-1/2" spindle diameters with a spindle speed of 6,000 RPM. "DigiSet" on left and top spindles. Mechanical digital readouts on all spindles. Inverter controlled feed speed from 16 to 78 FPM. (2) powered table roll- (1) in between top spindles, (1) at outfeed. 2 meter (6-1/2 Ft.) infeed straightening table; central location of lubrication points; chrome plated bed plates; waxilit pump; sound and safety enclosure. Condition: as taken from service - approx. New replacement cost is $77,000.00 Priced to sell.
Price: $26,000.00
Details: Wired for 460/3/60
Weinig Model No.: U23 E / 005 (UM#557)
6 Head 10-1/4" wide Unimat - YEAR 1998
6 ead Unimat, spindle configuration is 1st bottom, 2nd Right, 3rd Left, 4th Top, 5th Top, 6 th Bottom. 2.5 M infeed table. 1-13/16" diameter spindles, 6000 RPM; 18-78 FPM feed speed. Cutting circles: 1st bottom 5" to7-1/8"; 2nd right - 4-3/8" to 7-7/8"; 3rd left - 4-3/8" to 9-7/8"; 4th & 5th tops - 4" to 8-7/8"; 6th bottom - 4" to 9-7/8". Both axes of all spindles (except 1st bottom) equipped with MDR's. All left and top spindles with double MDR's for radial positioning. Pnuematic spindle clamping both axial and radial. Receeding chibreakers fully adjustable to cutting circles for spindles 4 and 5. Side pressure roll opposite 1st right. Central location of lubrication points.MDR's for pressure shoes on both top spindles. MDR on pressure shoe behind top spindles 4 and 5. "Digi-Set" for left and both top spindles. Prepared for 10-1/4" (260mm) wide planing with extended feed shafts, table plates, chipbreaker and pressure shoe. Condition: Very Good - AS TAKEN FROM SERVICE - Approximate current replacement cost as equipped is $110,000.00
Price: $37,000.00
Details: Spindle Horse powers: feed - 5.5 HP; 1st bottom - 10 HP; 2nd right/ 3rd left - 20 HP; 4th top - 20 HP; 5th top - 15 HP; 6th bottom - 15 HP. WIRED FOR: 230/3/60
Weinig Model No.: H23C (UM#558)
9" wide High Speed (200 FPM) Hydromat - YEAR 1999
6 head HYDROMAT, spindle configuration is 1st bottom, 2nd Right, 3rd Left, 4th Top, 5th Top, 6 th Bottom. 4 Ft. infeed table with (2) driven rools above and (1) driven in infeed table. 2-1/8" diameter spindles, 6000 RPM; Special 10-200 FPM feed speed. Cutting circles: 1st bottom 5" to7-1/8"; 2nd right - 4-3/8" to 9-7/8"; 3rd left - 4-3/8" to 9-7/8"; 4th & 5th tops - 4-3/8" to 9-7/8"; 6th bottom - 4" to 9-7/8". Both axes of all spindles (except 1st bottom) equipped with MDR's. All left and top spindles with double MDR's for radial positioning. Pnuematic spindle clamping both axial and radial. Receeding chibreakers fully adjustable to cutting circles for spindles 4 and 5. Side pressure roll opposite 1st right. Central location of lubrication points. MDR's for pressure shoes on both top spindles. MDR on pressure shoe behind top spindles 4 and 5. "Digi-Set" for left and both top spindles. Straight knife jointer for spindle #1. Automatic profile jointers for spindles 2 & 3 ( (jointing height 4-3/4"). Automatic Full width profile jointers for spindles 4,5,& 6. (2) additional driven table rolls (4 total). Outboard bearings for 4,5, & 6. Pnuematic receding chipbreaker on spindles 2, 4 & 5. (2) interior lights in enclosure. Free standing control pedestal. Condition: Very Good - AS TAKEN FROM SERVICE - Approximate current replacement cost as equipped - $230,000.00 ************ We take offers
Price: $56,000.00
Details: Spindle Horse powers: feed - 15 HP; 1st bottom - 20 HP; 2nd right - 15; 3rd left - 15 HP; 4th top - 25HP; 5th top - 25HP; 6th bottom - 20 HP. WIRED FOR: 460/3/60. Machine includes the following optional equipment: 2-1/8" spindle diameters; chromed tables and fences; multiple height pressure shoe after top spindle in lieu of standard; outboard bearing for spindle 1; Extension for adjustable feed roll by left spindle; straight knife jointers on spindles 4 & 5; (3) covers for out board bearings when not in use; (4) jointer cassettes; Heavy duty pressure shoe after spindle 4; Dual Voltage capability.
Weinig/Hoerbiger Model No.: P-120
Moulder Feeder
Price: $1,000.00
Details: EM4 Moulder Feeder
SK Machinery Model No.: SK 12006-6 (UM#542)
6 spindle, 12" WIDTH, Year: 2006
Standard equipped; STANDARD TOOLING INCLUDED. Excellent condition.
Feed Motor 10HP Variable (18-78fpm) ;
1st spindle bottom 15HP;
2nd spindle right 15HP;
3rd spindle left 15HP;
4th spindle top 25HP ;
5th spindle top 25HP ;
6th spindle bottom 20HP
Working width 1/2" to 11 7/8";
Working height 3/8" to 5" ;
Spindle diameter 2 1/8";
Spindle speed 6000rpm ;
Clamping length horizontal spindle 11.81";
Clamping length vertical spindle 5.12";
Diameter of feed rolls 140mm;
Adjustment range of straightening table 1/2";
Adjustment range of vertical spindle (axial) 2.36";
Adjustment range of all horizontal spindle (axial) 1.18";
Setting accuracy of digital read-outs .05mm ;
Minimum length of stock - 12";
Minimum length with short stock option- 7.87";
Cutting circle 1st bottom 5 to 5 13/16";
Cutting circle vertical spindles 4 to 7 7/8";
Cutting circle last bottom up to 9";
Manual lubrication pump for bed;
Receding chipbreaker on top heads;
Hydro Lock outboard bearing on each horizontal spindle;
40mm side fence;
4 powered bed rolls;
1 idle roller in bed;
9 upper feed rolls;
Approximate current replacement cost is $110,000.00
Price: $54,900.00
Additional Info: REASONABLE OFFERS CONSIDERED
7 products. Displaying 1 to 7.