Straight Line / Gang ripsaws
5 products. Displaying 1 to 5.
LEGAL NOTICE
Call (801)498-7891
High Point Model No.: HPR-12 (UM#572)
Straight Line Ripsaw YEAR 2006
The HPR-12 ripsaw is ideally suited for millwork, cabinet, and furniture companies requiring both performance and quality cut at an affordable price.
Outstanding Features:
Glue line accuracy to 8 ft. **
Double row of anti-kickback fingers **
Automatic chain lubricator-shuts off feed chain if oil levels are low **
One piece heat treated chain and race. Pins are ground. The chain blocks are diamond cut, precision machined and heat-treated for positive lumber feeding. Expect years of accuracy and service from these highly engineered components, forged and cut from the best possible steel and cast iron **
Precision built saw arbor. Made of nickel-chrome steel, large diameter, accurately ground and dynamically balanced, it runs on large diameter, angular contact ball bearings to limit any radial run-out and axial thrust **
Heavy duty construction, 2100 Lbs in weight. **
Solid steel cylindrical guide rail and cast iron fence, to insure accurate set-up and quick movement. Precise positioning of the fence to the inlaid scale. **
Swing down rear table avoids possible damage to the machine by preventing short workpieces from accidently sliding between the chain and table when they are fed to the end. **
A side guard is provided at the infeed end and gives added safety to the operator. **
A laser and mounting bracket is provided as standard equipment. ** NEW CHAIN INSTALLED ** Machine in like new condition ** Current list price is $14,900.00
Price: $7,900.00
Details: SPECIFICATIONS Minimum working length - 200mm (8”) ** Maximum thickness - 85mm (3.35”) ** Throat depth - 460mm (18”) ** Saw arbor motor - 11 kW (15 HP) ** Saw arbor speed - 4600 rpm ** Saw blade diameter - 200-300mm (8”-12”) ** Saw arbor diameter - 1” ** Feed motor - 1.5 kW (2HP) ** Feed speed (Variable) - 17 to 40M/min (37-88 fpm) ** Number of hold down rolls - 6 ** Work table height -800mm (31.5”) ** Table area (W x L) - 45” X 61” ** Net weight - 950 kg (2090 lbs) **
HIGH POINT Model No.: SR-12 (UM# 633)
Straight Line Ripsaw
12" blade, 10 HP arbor motor. Includes 10 mW laser light, automatic chain lubricator, main motor load meter, anti-kickback fingers.
Price: $4,750.00
Raimann Model No.: KM310 US (UM#562)
Gang ripsaw with "Quick-Fix" arbor - year-1999
Raimann KM 310 US gang ripsaw with 50 HP motor wired for 480/3/60. Includes transformer for use on 240/3/60, two lasers. Condition: as taken from service. ***** *****
Price: $22,500.00
Weinig / Raimann Model No.: KM 310 2M with ValueRip III optimizing (UM#571)
2 moving blade ValueRip Optimizing Ripsaw system - YEAR 2006
The ProfiRip KM 310 series from RAIMANN’s range of gang ripsaws is the ideal starting place for more economical ripping. The basic machine is solid steel construction with a fixed fence on the right and conforms to strict European safety norms (CE) as well as the German BG regulations for dust protection. The standard version can boast the following outstanding features:
- cutting accuracy of +/- 0.008” ensured by the cast-iron transport chain which runs on dual v-guiding system, providing superior board control. Includes wear resistant chain dip. **
- fast set-up of arbor with Quickfix blade positioning and Laser-fix pivoting lasers **
- easy feeding thanks to an extended transport chain with spikes. Just put the board on the chain and it is transported effortlessly into the machine. **
- operator friendly, easy access wide open hood and centrally arranged control elements **
- low maintenance closed transport chain for interruption-free production, automatic chain lubrication and maintenance-free saw arbor bearings **
- safety for personnel provided by 5-fold anti-kick-back protection, and locking safety hood with noise protection **
Standard Equipment:
• Quickfix arbor with 4 clamping flanges, 5 blades and set-up templates
• easy-access safety hood, fully noise protected, with window
• 2 pressure boards with pressure-board clamping device
• arbor height adjustment via pull-out hand wheel
• fence positioning via easy cam-lock lever
• v-belt driven saw arbor, incl. protection cover, easily accessible
• centrally arranged machine controls
• frequency controlled feed speed, infinitely variable up to 115 fpm
• infeed limit switch for automatic machine STOP in case of oversized boards
• extended machine frame and transport chain for effortless feeding
• automatic star-delta with thermal over current relays for soft-start
• EMERGENCY STOP switches at both the infeed and outfeed side
• 480 V*, 3 phase / 60 Hz electrics manufactured by Moeller, with 37 kW (50 HP) arbor motor. Electrical cabinet integrated in machine frame. All components conform to UL regulations.
* Note: allowable voltage fluctuation: +10%/ -5%
• operator manual, parts list, schematics, set of tools **
Raimann movable head for rip-on-demand and rip-for-yield **
4 each Quickfix Clamping Flanges with double keyways. One required per fixed blade for clamping to Quickfix arbor. **
Pressure Shoe, Plywood, closed design to make custom blade slots. **
Pressure Shoe, Phenolic, Slotted open design with one slot for zero-line blade,
for long-lasting performance and reliable durability. **
Spikes, every 3rd Chain Link - impact depth 0.020”. The spikes keep the work piece on the chain and thus guarantee an absolutely parallel board feed and an accurate cut. **
Noise Protection - All interior surfaces are lined with noise dampening material and openings where noise may be released are insulated. Registered sound level is below 85 dB(A). **
Driven Outfeed Roller Unit - Solid driven lower outfeed pressure roller, fixed to the machine frame after the transport chain, assures the material outfeed and helps prevent end snipes. **
Solid non-driven upper pressure roller fixed to the pressure hood and thus height adjustable, keeps the work piece in place during outfeed transport. **
Electronic Control Unit "Proficut II” for 2 movable heads - This system controls 2 movable saw units (axes) and consists of a programmable controller, battery buffered, memory of 200 values, i.e. 10 cutting programs with 10 values each.
• touch screen to program nominal values
• twenty big push-buttons, ergonomically arranged, for pulling up the pre-programmed sizes
• further control keys for all other machine functions such as feed speed, saw ON/OFF, emergency stop, etc.
• feed regulation, 2 speeds (fast/slow motion) **
Caution: temperature range between 32°F and 104°F
Operating functions:
*Single Mode
- direct input of nominal value with keypad **
*Manual Mode
- press arrow key left or right to move blade **
*Program Mode
- select pre-set sizes with big push-buttons
- nominal value (blade position) is displayed until the next selection **
4 Laser Units 15mW (2 fixed, 2 movable) - 2 follow-on and 2 fixed lasers, each 15 MW, incl. Laser-fix fast adjusting mechanism **
5 each Raimann Standard Saw Blades, 28 teeth, 4mm kerfs, ∅ 300mm. For speeds of up to 115’/min **
Rip Assist for 2 Axis - Includes joystick control - Approx. Current New Price is $245,350.00 - asking price is $189,900.00 - INCLUDES SET-UP
Call (801)498-7891
Details: TECHNICAL DATA - MATERIAL:
cutting width from 1" to 12 ¼” **
throat opening - 25 ½” **
minimum strip width - 7/8" **
maximum cutting height with pressure board - 2.5" **
maximum cutting height without pressure board - 3" **
minimum material length - 15-3/4"
TECHNICAL DATA – MACHINE:
arbor motor - 50 HP **
nominal voltage - 480/3/60 **
nominal current - 75 Amp **
chain width - 13-1/2"
diameter of saw arbor - 65 mm **
saw blade bore - 80 mm **
revolutions of saw arbor - 4200 RPM **
standard saw blade diameter - 300 mm (11.8") **
feed speed, infinitely variable to 115 FPM **
feed motor capacity - 1 HP **
working height - 33-1/2" **
required dust collection volume - minimum 2500 CFM **
diameter of dust suction hood - 250 mm (9-13/16") **
net weight - 4100 Lbs **
dimensions length x width x height - 5' x 5' x 6.25'
Additional Info: Valu-Rip® system provides today’s rough mills with the ability to predict process yields and improve quality control. Valu-Rip® uses Ultra-Sonic technology to measure the width of the board and present the optimized ripping solution to the operator via laser lights. Valu-Rip® III can also position the board, via a servo fence, in front of the rip saw. **
With the Raimann Valu-Rip® III optimizing infeed system, your operator will obtain higher yields with less decision-making, allowing you to fully utilize the benefits of moving saw blade technol-ogy. **
• Provides the tools necessary to balance rip yield with “Just In Time” production needs. **
• Rip what you need, when you need it while obtaining the highest possible yield. **
• Provides you with statistical reports that give you the ability to track incoming and outgoing material. **
• System built on the flexible ScanCore foundation to allow for future upgrade as well as customizable reporting. **
Result: Your operator produces the best value from your material…in the right quantity, at the right time. **
Optimizing Infeed System “Valu-Rip III”:
consisting of:-
1a) 15’ infeed with movable servo fence. **
1b) High precision Ultra-sonic Width Measurement Sensor (single point). **
2) Industrial PC with ergonomic, user-friendly 12" touch screen. **
3) Scancore optimizing/tally software, based on clear board width optimizing. **
System will automatically position fence and moving blades appropriate to solution. **
Valu-Rip "Office Package" software - Valu-Rip Software License only. To be installed on existing computer/network.
5 products. Displaying 1 to 5.