Wide Belt Sanders
6 products. Displaying 1 to 6.
LEGAL NOTICE
Call (801)498-7891
BLUE STEEL Model No.: PR 4375 A (UM# 655)
43" SINGLE HEAD WIDE BELT SANDER - YEAR 2006
43" SINGLE HEAD WIDE BELT SANDER WITH COMBINATION HEAD. Uses 43" X 75" belts, caliper type disc brakes on sanding head; variable speed feed conveyor - 16 to 80 FPM feed speed; workpiece thickness of 1/8" to 5"; power table raise / lower with digital control; spring loaded rubber coated holddown rolls; electronic belt oscillation; 15 HP main sanding head motor; wired for 230/3/60 (56 Amp connected load); net weight 2680 Lbs. Current list price is $21,380.00.
Price: $11,250.00
BÜTFERING Model No.: SCO-311 MRL (UM# MS 26514)
43" Planer / Sander / Sander - SHOW ROOM MACHINE - YEAR - 2004
Description: Used SHOW ROOM MACHINE, BÜTFERING WIDE BELT SANDER, MODEL SCO 311 MRL ***
Includes original factory warranty. *** LOCATION: Grand Rapids, MI ***
Triple head planer / sander: Head #1 is a spiral cutter-head, Head #2 is a rubber profiled contact roller, Head #3 is a combination head with air cushion pad.
Working width of 43”.
Constant pass line height of 35 ½”.
Spiral cutter head with four sided, curved face insert knives and alternating spiral design.
Segmented anti-kickback in feed section.
Contact roller is a profiled 85 shore rubber 9 ½”diameter roller with grit compensation.
Combination head as third head with profiled rubber contact drum and air cushion pad with anti – dubbing feature.
Two speed abrasive belt on head #3 from 30 FPS or 60 FPS.
Air jet abrasive belt cleaning system on head #3.
Panel cleaning brush.
Grit size compensation system.
Automatic positioning of cutter head and both contact rollers.
Automatic conveyor belt tracking.
Electronic belt oscillation system.
Electronic motor braking system.
Over thickness protection system.
Variable feed speed of conveyor 8 – 43 FPM.
Conveyor belt of special harder material.
Safety interlocks on all access doors.
In feed roller extension.
Emergency stops at infeed and out-feed locations.
CURRENT NEW PRICE OF THIS MODEL - $134,980.00 with installation ***
THIS MACHINE ONLY (MS#26514) - AT THIS PRICE - with installation (our normal service area only).
Price: $91,980.00
Details: Technical Specifications Working width 1100 mm ( 43” ); Abrasive Belt width 1120 mm ( 44” ); Abrasive Belt length 2150 mm ( 85” ); Workpiece thickness min. 3 mm ( 1/8” ); Workpiece thickness max. 160 mm ( 6 1/4” ); Feed speed - Variable 2.5 – 13 m/min. ( 8 – 43 FPM ); Feed motor 2.2 kw (3 HP) Planer Head 34 HP; Contact Roller 30 HP; Combination Head - 25 HP; Total power required 57 kw; Electrical connection 460 volts ( 230 with optional transformer*); Amperage @ 230 volts - 220 amps ** @ 460 volts - 110 amps ** Dust collection requirements 5500 CFM; Dust outlet – Planer head 2 x 160 mm ( 6 1/4” ); Dust outlet – Contact roller 160 mm ( 6 1/4” ); Dust outlet – Combination head 160 mm ( 6 1/4” ); Dust outlet – Cleaning brush 140 mm ( 5 ½” ); Compressed air requirements 90 PSI; Air consumption per cycle 2 CFM; Machine net weight 4600 kg ( 10,120 lbs ); Electrical connection: 460 Volts, 3-phase, 60 Hz. * This is a single voltage machine. An optional (at additional cost) transformer may be required at time of installation. IN CASE OF INCOMING MAIN VOLTAGE FLUCTUATIONS OF MORE THAN +5% / - 5% OF MACHINE CONNECTED VOLTAGE, INCLUDING PHASE TO GROUND, A VOLTAGE STABILIZER MUST BE INSTALLED BY THE CUSTOMER ON THE INCOMING POWER CONNECTION.
SCMI Model No.: Sandya 20 - RRT -130
53" Triple Head wide belt sander - YEAR 2002
The Sandya 20 is an industrial sander designed to run for up to 12 hours a day. It comes standard with a power raise / lower of the worktable; variable speed feed conveyor; digital display showing working thickness; dust-proof, membrane control panel; electronic sanding belt oscillation; rubber-coated pressure rollers, automatic belt centering, 1st head -steel calibrating drum - 40 HP, 2nd head - rubber covered contact roll 65 Sh. - 25 HP, 3rd head - 2" wide finishing platen - 20 HP; 54" X 103" belt size; air blast abrasive belt cleaning; automatic thickness setting device with motorized table lift; WYE-DELTA soft start, and much more. Approximate current replacement cost is $85,000.00. CONDITION: Excellent- AS TAKEN FROM SERVICE.
Price: $35,900.00
Details: Working width mm - 1350 •••• Dimensions of the longitudinal abrasive belt 1370 x 2620 mm •••• Min/max. machining thickness on the conveyor table 4 – 200 mm •••• Motor power of the 1st group (M3 base) kW (HP) 30 (40) •••• Motor power of the 2nd/3rd group (M3 base) kW (HP) 11 (15)
TIMESAVER Model No.: 2331-24-201 (UM# 599)
43" 3 HEAD PLANER /SANDER / SANDER - YEAR (Dec.) 2005
Series 2300 standard equipment includes:
Centralized control panel ***
Digital thickness readout ***
Double infeed & outfeed holddown rolls ***
Hour meter ***
Main motor load meters/Watt meters ***
Four bed jacks ***
Infeed stop bar ***
CONDITION: as taken from service (light usage)
Approx. Price new $61,000.00
Price: $28,900.00
Details: three top-head configurations *** 6" diameter spiral planer head (in first position) *** 5 1/2" diameter drum on combination head *** Dial indicators on drums/platen *** 2 1/2" platen width on combination head *** One spare platen *** 75" abrasive belt length *** Disc brakes on main motors *** Sectional infeed shoe *** 20-45 FPM feed speed A/C *** Auto set-up device *** Motorized lift *** 0-5" opening (33-38" passline) *** 14" infeed loading area *** Quick release outboard support *** Knife head maintenance kit *** Anti-kickback fingers *** Through-beam abrasive belt tracking *** 15" minimum part length
Powermatic Model No.: WB36 (UM#524)
Wide Belt Sander
Price: $3,500.00
Details: 36" Single Head Sander
6 products. Displaying 1 to 6.