Stop/Gauge - Pusher Systems
3 products. Displaying 1 to 3.
LEGAL NOTICE
Call (801)498-7891
Tigerstop Model No.: TF
DEMO MODEL
TigerFence- 2006 demonstrator. The TigerFence can give you 15% to 20% more from your saw with repeatability and accuracy that you have never had before. No more walking around the saw to adjust the fence. The controller is mounted right where you need it, allowing the operator to stay with the material. It is easy to key in the part lengths, including fractional and decimal dimensions. Push the button and the fence is automatically positoned for a perfect cut every time. TigerFence will pay for itself in a short amount of time. You'll appreciate the reduced waste, improved accuracy and product output. Standard fence travel is 51". Easily installs on most brands including Altendorf, Casadei, Delta, Laguna, Lobo, Martin, Mini-Max, Panhans Robland, SAC, Sawstop, and many others. Can be used on tenoners, panel raising equipment, and shape and sand machines (as a front fence option for sizing. Wired for 120/1/60. CURRENT NEW PRICE IS $3,995.00
Price: $3,100.00
TIGERSTOP Model No.: TS-10 (UM# 621)
10 Ft. automated stop gauge and pusher
The standard 10 Ft. TigerStop system is easy to install on almost any piece of equipment, be it a cutoff saw or a drill press. It's so simple to use that nearly every employee can be trained in five minutes and produce rapidly in one day. No. complicated calculations or measurements are required. The position can be input in the method of your choice: standard or metric with fraction, decimal, feet, inches. It's available in multiple languages. The controller computes and displays the position in inches or metric. Everyone using the TigerStop will be a more productive employee. TigerStop utilizes six (6) basic functions: GO - Enter any length on the keyboard and press start - TigerStop instantly moves to that position. GO SET - Turn TigerStop's number keys into "hot" keys to access up to 99 lengths that you cut often, so that you don,t have to enter each length every time. INCREMENT - Hit the increment key and enter a value (+ or -) to move the stop relative to its current position. Continue incremental movement by hitting START. This is an easy way to cut fixed identical lengths. The TigerStop will move the material to your programmed length every time. PUSH FEED - TigerStop can function as a push feeding system, allow for saw kerf, and deliver finished lengths, drilled hole patterns or punched material on the outboard side of your saw or machine tool. CUT LIST - You can use your TigerStop as a set point stop system and enter up to 2000 + lengths with a limit of 999 each into its powerful memory. CALCULATE - With TigerStops built-in 10 key calculator, you can calculate a new length based upon your last position or on a new value. After doing the calculation, TigerStop moves to the new position. TigerStops are accurate to +/- 0.004" both in repeatability and absolute measurement. Includes PF pusher foot. Wired for 110/1/60. Condition: Very good - as taken from service. Approx. current replacement cost is $4995.00. Whirlwind 212 upcut saw NOT included in price.
Price: $2,450.00
Details: 212L UP-CUT SAW SOLD SEPERATELY - $2,200.00
3 products. Displaying 1 to 3.